Thursday, June 26, 2014

MSL CFM-21 Battery Replacement Tips


MEDSINGLONG GLOBAL GROUP CO., LIMITED(MSL) team to provide Professional all kinds of Medical machinery Maintenance Tips technical support.Today we are going to introduce the battery replacement procedures and methods. 

First step

1. Turn the power switch OFF and disconnect the power cord from the wall outlet.
2. The battery cover is on the bottom of machine, Use medium screwdriver to remove the screw.
CFM-21 Battery Replacement 1

The second step

3. Remove the battery cover, now you can see the battery in its housing.
CFM-21 Battery Replacement 2

The third step

4. Remove top case assembly as described in section 6.2.1.
5. Disconnect the battery connetctor.
CFM-21 Battery Replacement 3

step four

6. Gently pull the battery out its housing.
7. Put the new battery into its housing, Reassemble in reverse order.
CFM-21 Battery Replacement 4

The article comes from:http://www.medicalequipment-msl.com/htm/medical-device-book/MSL-CFM-21-Battery-Replacement-Tips.html
More about my team,you can click the video:http://v.youku.com/v_show/id_XNzI3MTcwNTIw.html

MSL CFM-21 Battery Replacement Tips


MEDSINGLONG GLOBAL GROUP CO., LIMITED(MSL) team to provide Professional all kinds of Medical machinery Maintenance Tips technical support.Today we are going to introduce the battery replacement procedures and methods. 

First step

1. Turn the power switch OFF and disconnect the power cord from the wall outlet.
2. The battery cover is on the bottom of machine, Use medium screwdriver to remove the screw.
CFM-21 Battery Replacement 1

The second step

3. Remove the battery cover, now you can see the battery in its housing.
CFM-21 Battery Replacement 2

The third step

4. Remove top case assembly as described in section 6.2.1.
5. Disconnect the battery connetctor.
CFM-21 Battery Replacement 3

step four

6. Gently pull the battery out its housing.
7. Put the new battery into its housing, Reassemble in reverse order.
CFM-21 Battery Replacement 4

The article comes from:http://www.medicalequipment-msl.com/htm/medical-device-book/MSL-CFM-21-Battery-Replacement-Tips.html
More about my team,you can click the video:http://v.youku.com/v_show/id_XNzI3MTcwNTIw.html

Wednesday, June 25, 2014

What maintenance should be done when the centrifuge separation technology enters a new period

Now High speed centrifuge Equipped with the analytical optical system,the existing ultracentrifuge for analyzing can be used for quantitative Analysis.This text introduces in the process of clinical use,the centrifuge's common malfunction and its exclusion methods and maintenance tips. 
Often in the process of using,the motor can't start.We should check the attrition rate of carbon brush when the main power indicator lights.If over one third of the total,it's time to replace the carbon brush.If the main power indicator doesn't light,we should check whether the fuse of indicator or indoor switch panel blows out or not,also check whether the power cord good contacts.In the case of the fuse blows out,it's time to replace it to ensure smooth circuit.Besides,we should examine the figure of vacuum pumps and oil pressure.The motor can't start with excessive oil pressure.We also should check whether each oil-way especially the small throttling hole is blocked,clear it if blocked.If the bearing breaks or is obstructed when rotating,or the totor can not reach the rated speed,it's time to change or clear the bearing. 
The oxide on the commutator surface,even be burnt into sags and crests,or the brush mismatch with the commutator's outer edge,all lead to its speed declining.We should clean the commutator to make good contact.If the coil of the rotor shorts or breaks,we could test it with a multimeter and wind coil again.Within the use of the rotor,the centrifugal pipe may burst,sample may leak and rotor may break because of metal fatigue,overspeed,overstress,chemical corrosion,improper rotor selection,unbalanced swivel and temperature runaway. 
High speed centrifuge 
In the above cases,it requires the operators to be skilled in operating procedures,choose suitable centrifuge Hematocrit centrifuge tube and rotor,control every step of operation strictly,try to reduce unnecessary artificial damages and use the rotor within the safety factor and guarantee period. 
Power barrier is one of the leading causes of poor freezer and refrigeration start,which also causes motor not turning,so we should check the power and fuse respectively. Low voltage and safety device failure also can fail the start of the freezer.Low voltage may be caused by low grid voltage,too much switchboard wiring or too long power line,which is supposed to be 3meters.If the power line capacity is not enough,it will not only reduce the voltage,but may also result in an accident. When the supply (benchtop centrifuge)voltage drops to 180-190VJ,freezer does not start,which impacts the cooling effect.If any abnormal phenomena presents when working,we must stop immediately to reduce unnessary damage.

What maintenance should be done when the centrifuge separation technology enters a new period

Now High speed centrifuge Equipped with the analytical optical system,the existing ultracentrifuge for analyzing can be used for quantitative Analysis.This text introduces in the process of clinical use,the centrifuge's common malfunction and its exclusion methods and maintenance tips. 
Often in the process of using,the motor can't start.We should check the attrition rate of carbon brush when the main power indicator lights.If over one third of the total,it's time to replace the carbon brush.If the main power indicator doesn't light,we should check whether the fuse of indicator or indoor switch panel blows out or not,also check whether the power cord good contacts.In the case of the fuse blows out,it's time to replace it to ensure smooth circuit.Besides,we should examine the figure of vacuum pumps and oil pressure.The motor can't start with excessive oil pressure.We also should check whether each oil-way especially the small throttling hole is blocked,clear it if blocked.If the bearing breaks or is obstructed when rotating,or the totor can not reach the rated speed,it's time to change or clear the bearing. 
The oxide on the commutator surface,even be burnt into sags and crests,or the brush mismatch with the commutator's outer edge,all lead to its speed declining.We should clean the commutator to make good contact.If the coil of the rotor shorts or breaks,we could test it with a multimeter and wind coil again.Within the use of the rotor,the centrifugal pipe may burst,sample may leak and rotor may break because of metal fatigue,overspeed,overstress,chemical corrosion,improper rotor selection,unbalanced swivel and temperature runaway. 
High speed centrifuge 
In the above cases,it requires the operators to be skilled in operating procedures,choose suitable centrifuge Hematocrit centrifuge tube and rotor,control every step of operation strictly,try to reduce unnecessary artificial damages and use the rotor within the safety factor and guarantee period. 
Power barrier is one of the leading causes of poor freezer and refrigeration start,which also causes motor not turning,so we should check the power and fuse respectively. Low voltage and safety device failure also can fail the start of the freezer.Low voltage may be caused by low grid voltage,too much switchboard wiring or too long power line,which is supposed to be 3meters.If the power line capacity is not enough,it will not only reduce the voltage,but may also result in an accident. When the supply (benchtop centrifuge)voltage drops to 180-190VJ,freezer does not start,which impacts the cooling effect.If any abnormal phenomena presents when working,we must stop immediately to reduce unnessary damage.

Sunday, June 22, 2014

Nouvelle haute intensité concentre couteau à ultrasons de la Chine utilisés dans les essais cliniques.

Notre technologie de l'hyperthermie a progressé.Récemment,Pékin Rende Sheng Technology Company et Hong Kong Taihe Société ont signé un contrat pour mettre conjointement RDS HIFU machine de Appareil d’ultrasonographie traitement de la tumeur dans la R & D plate-forme a la plate-forme d'application .
4D color doppler ultrasound system
Selon principal développeur de HIFU couteau Chercheurs Ren Aiqing , cette technologie est de produits high-tech avec des droits de propriété intellectuelle.RDS focalisés de haute intensitéScanners de bétail par ultrasons à une thérapie,adopte l'énergie ultrasonore,fait jouer pleinement la principale caractéristique d'échographie: graisse pas surchauffer ,pénétrant bien, montrant fort,la performance des local .Dans le contrôle précise de l'ordinateur ,par le transducteur,met des centaines de botte ondes sonores concentrer dans des directions différentes à la même tumeur par canal ultrasons,et convertie en chaleur,Environ 0,25 secondes, la température de traitement de la tumeur atteint 70 ℃ ~ 100 ℃,jusqu'à la dégénérescence des cellules de tumeur, de la nécrose, à des fins thérapeutiques.Utilise traitement cumulatif dans le traitement ,peu de lignes, dans une surface de la surface de ligne, dans un corps,tuer les cellules tumorales tour à tour,Et sa destruction est précis ,concentrer en dehors des six cellules.Parce que le traitement sans anesthésie Respiratoire stupéfiants, le patient est éveillé, et une plus grande sécurité du traitement.
The article comes from: http://www.medicalequipment-msl.com/fr/htm/livre-de-dispositif-médical/Nouveaux-inscrits-sur-des-couteaux.html
More about my team,you can click the video:http://v.youku.com/v_show/id_XNzI3MTcwNTIw.html

Nouvelle haute intensité concentre couteau à ultrasons de la Chine utilisés dans les essais cliniques.

Notre technologie de l'hyperthermie a progressé.Récemment,Pékin Rende Sheng Technology Company et Hong Kong Taihe Société ont signé un contrat pour mettre conjointement RDS HIFU machine de Appareil d’ultrasonographie traitement de la tumeur dans la R & D plate-forme a la plate-forme d'application .
4D color doppler ultrasound system
Selon principal développeur de HIFU couteau Chercheurs Ren Aiqing , cette technologie est de produits high-tech avec des droits de propriété intellectuelle.RDS focalisés de haute intensitéScanners de bétail par ultrasons à une thérapie,adopte l'énergie ultrasonore,fait jouer pleinement la principale caractéristique d'échographie: graisse pas surchauffer ,pénétrant bien, montrant fort,la performance des local .Dans le contrôle précise de l'ordinateur ,par le transducteur,met des centaines de botte ondes sonores concentrer dans des directions différentes à la même tumeur par canal ultrasons,et convertie en chaleur,Environ 0,25 secondes, la température de traitement de la tumeur atteint 70 ℃ ~ 100 ℃,jusqu'à la dégénérescence des cellules de tumeur, de la nécrose, à des fins thérapeutiques.Utilise traitement cumulatif dans le traitement ,peu de lignes, dans une surface de la surface de ligne, dans un corps,tuer les cellules tumorales tour à tour,Et sa destruction est précis ,concentrer en dehors des six cellules.Parce que le traitement sans anesthésie Respiratoire stupéfiants, le patient est éveillé, et une plus grande sécurité du traitement.
The article comes from: http://www.medicalequipment-msl.com/fr/htm/livre-de-dispositif-médical/Nouveaux-inscrits-sur-des-couteaux.html
More about my team,you can click the video:http://v.youku.com/v_show/id_XNzI3MTcwNTIw.html

Friday, June 20, 2014

It is necessary to wear the protective clothing during the X ray inspection

Most people don't know the danger of ionizing radiation
X ray is a kind of medical inspection method
Do you wear the protective clothing during the X ray inspection? When mentioned this question,most people said no.The health supervision institute of Medising long company made a special inspection,our staffs found that most hospitals have the protective clothing,but the the doctors don't ask the patients to wear it and most people don't realize the danger of ionizing radiation and don't use the lead suit.
Most patients don't know to wear the protective clothing during the X ray
At the entrance of X ray inspection room,we found that the warning notes posted on the wall,like "watch out the "ionizing radiation","Inform the doctor earlier if you are pregnant".One woman patient is going for the X ray chest inspection,the nurse help her wear the lead hat and lead aprons.Inside the X ray inspection room,we also found the warning notes,which inform the patients to wear the protective clothing and teach them how to wear it properly.
Full body radiation protective suit | Radiation proof suit
Although the protective clothing in the hospital is enough,but seldom patient will wear the clothing and seldom the doctor will inform that.It is reported in the interview,some people don't realize it is necessary to wear the protective clothing in the X ray inspection.One patient told us,every time she did the X ray chest inspection,the doctor only ask her to take off the purse and jewelry,but never told her to wear the protective clothing.While her workmates are all the same,standing in front of the machine without wearing any protective clothing.
You can complain that if there is no protective clothing in the hospital
It is explicitly stipulated in the "radiological diagnosis and treatment regulation",with other medical institutions to carry out the interventional radiology X-ray imaging in the diagnosis of the workplace,personnel protective equipment shall be equipped with work and client personal protective equipment On nearby light sensitive organs and tissues of thyroid gland eyes,etc.for shielding protection,and prior informed patient and client radiation effects on health
The staff of Medising long health supervision bureau told us,they inspect 22 medical institutions and found that most hospital have the protective clothing,but the doctor don't inform the patient to wear it,while the patient also are lack the knowledge of self protective.Especially some large hospital,during the busy time or accepting the team inspection,they almost ignore that.
While there is no punishment for the lack of informing,.So we call on improving our self protection consciousness during the X ray inspection.If the hospital ignore that,we can complain to the local health supervision department.
The X ray inspection should no more than 1 time every year.
X ray is a kind of ionizing radiation,which will break the macromolecular structure inside the body and even damage the cellular.The body will be hurt.So during the X ray time,except the illuminated part,the other parts shall be protected by the clothing.When we wear the protective clothing,we can resist 99% scattered light.
If we don't wear the protective clothing during one X ray inspection,will our body be damaged? The staff of Medising long health supervision bureau told that if the x ray protection is in the limited range,the damage is not harmful.If the X ray radiometric is beyond the limitation,it will result in the radiation reaction,or bring in serious radiation damage.As the illuminated part is not the same,so the X ray radiation is also different.
It is explicitly ruled by the National Health and Family Planning Commission,the inspection frequency and illuminated radiation shall be strictly controlled,every person shall no more than one X ray inspection in one year.It is suggested that the patients shall avoid the fluoroscopic examination if the normal examination is OK,which shall also based on the actual situation.
Guangzhou Medsing Long Ltd.could supply all the medical machine you need,like the dental chair,veterinary ultrasound,operation bed,Ultrasound,Ventilator,Autoclave,baby bed,X ray machine,corpse refrigerator,X ray protective product,which are all high quality,high insurance and affordable.Whatever for hospital,personal clinic and own use,you will find the one you desired.Our service principle is "not for the better,but for the best",make our costumers feel comfortable and satisfied in using.We will be available at any time.
The article comes from:http://www.medicalequipment-msl.com/htm/medical-device-book/necessary-to-wear-the-protective-clothing-during-the-X-ray-inspection.html

It is necessary to wear the protective clothing during the X ray inspection

Most people don't know the danger of ionizing radiation
X ray is a kind of medical inspection method
Do you wear the protective clothing during the X ray inspection? When mentioned this question,most people said no.The health supervision institute of Medising long company made a special inspection,our staffs found that most hospitals have the protective clothing,but the the doctors don't ask the patients to wear it and most people don't realize the danger of ionizing radiation and don't use the lead suit.
Most patients don't know to wear the protective clothing during the X ray
At the entrance of X ray inspection room,we found that the warning notes posted on the wall,like "watch out the "ionizing radiation","Inform the doctor earlier if you are pregnant".One woman patient is going for the X ray chest inspection,the nurse help her wear the lead hat and lead aprons.Inside the X ray inspection room,we also found the warning notes,which inform the patients to wear the protective clothing and teach them how to wear it properly.
Full body radiation protective suit | Radiation proof suit
Although the protective clothing in the hospital is enough,but seldom patient will wear the clothing and seldom the doctor will inform that.It is reported in the interview,some people don't realize it is necessary to wear the protective clothing in the X ray inspection.One patient told us,every time she did the X ray chest inspection,the doctor only ask her to take off the purse and jewelry,but never told her to wear the protective clothing.While her workmates are all the same,standing in front of the machine without wearing any protective clothing.
You can complain that if there is no protective clothing in the hospital
It is explicitly stipulated in the "radiological diagnosis and treatment regulation",with other medical institutions to carry out the interventional radiology X-ray imaging in the diagnosis of the workplace,personnel protective equipment shall be equipped with work and client personal protective equipment On nearby light sensitive organs and tissues of thyroid gland eyes,etc.for shielding protection,and prior informed patient and client radiation effects on health
The staff of Medising long health supervision bureau told us,they inspect 22 medical institutions and found that most hospital have the protective clothing,but the doctor don't inform the patient to wear it,while the patient also are lack the knowledge of self protective.Especially some large hospital,during the busy time or accepting the team inspection,they almost ignore that.
While there is no punishment for the lack of informing,.So we call on improving our self protection consciousness during the X ray inspection.If the hospital ignore that,we can complain to the local health supervision department.
The X ray inspection should no more than 1 time every year.
X ray is a kind of ionizing radiation,which will break the macromolecular structure inside the body and even damage the cellular.The body will be hurt.So during the X ray time,except the illuminated part,the other parts shall be protected by the clothing.When we wear the protective clothing,we can resist 99% scattered light.
If we don't wear the protective clothing during one X ray inspection,will our body be damaged? The staff of Medising long health supervision bureau told that if the x ray protection is in the limited range,the damage is not harmful.If the X ray radiometric is beyond the limitation,it will result in the radiation reaction,or bring in serious radiation damage.As the illuminated part is not the same,so the X ray radiation is also different.
It is explicitly ruled by the National Health and Family Planning Commission,the inspection frequency and illuminated radiation shall be strictly controlled,every person shall no more than one X ray inspection in one year.It is suggested that the patients shall avoid the fluoroscopic examination if the normal examination is OK,which shall also based on the actual situation.
Guangzhou Medsing Long Ltd.could supply all the medical machine you need,like the dental chair,veterinary ultrasound,operation bed,Ultrasound,Ventilator,Autoclave,baby bed,X ray machine,corpse refrigerator,X ray protective product,which are all high quality,high insurance and affordable.Whatever for hospital,personal clinic and own use,you will find the one you desired.Our service principle is "not for the better,but for the best",make our costumers feel comfortable and satisfied in using.We will be available at any time.
The article comes from:http://www.medicalequipment-msl.com/htm/medical-device-book/necessary-to-wear-the-protective-clothing-during-the-X-ray-inspection.html

Monday, June 16, 2014

Centrifuges have wide applications,but exist technical barriers

A large number of centrifuges used in chemical,petroleum,food,pharmaceutical(Hematocrit centrifuge),mineral processing,coal,water and marine sectors.Centrifuge the use of centrifugal force to separate a mixture of liquid and solid particles or liquid and liquid components in the machine.Centrifuge is mainly used for the separation of solid particles from the liquid;or emulsion of two different densities,and separate immiscible liquids (e.g.,separating cream from milk);It can also be used to exclude wet solid in a liquid,for example,rejection of wet clothes washing machine;special overdrive tube separator for separating gas can also be a mixture of different densities;using different density or size of the settling velocity of the solid particles in a liquid different characteristics,some settling centrifuge also on the density or particle size of solid particles by classification.
Centrifuge industry exist technical barriers
The centrifuge(High speed centrifuge) as one of the important pharmaceutical products and equipment,the market demand continues to increase.At the same time,the industry is also rising market requirements.However,the domestic market less competitive centrifuge is the most immediate problem facing,how to overcome technical barriers to the industry's top priority.
The advanced technology of the centrifuge step on the road of internationalization
Domestic centrifuges and imported centrifuges doesn't have great difference,China already has a centrifuge core technology.Same grade centrifuges price difference between them is not large,the main distinction in performance and configuration.The main difference is in terms of performance,the centrifuge with frozen much more expensive than the average,there are some centrifuges heating function,the higher the number of centrifuges price control program.The difference is larger configuration,the attachment will sometimes tend to price higher than the price of the host.When you purchase this product,you should be noted that in addition to the host,select the rotor (number and types),plus the necessary centrifuge tubes,tube sets,special centrifuge bottles or bags,all of which add up to is a complete benchtop centrifuge Price.
Want to catch up on foreign-made products centrifuges footsteps,we must develop advanced technologies,make a fuss in terms of performance and configuration devices,continued to narrow the gap between the two,gradually embarked on the road of internationalization.
The article comes from:http://www.medicalequipment-msl.com/htm/medical-device-book/Centrifuges-have-wide-applications.html

Centrifuges have wide applications,but exist technical barriers

A large number of centrifuges used in chemical,petroleum,food,pharmaceutical(Hematocrit centrifuge),mineral processing,coal,water and marine sectors.Centrifuge the use of centrifugal force to separate a mixture of liquid and solid particles or liquid and liquid components in the machine.Centrifuge is mainly used for the separation of solid particles from the liquid;or emulsion of two different densities,and separate immiscible liquids (e.g.,separating cream from milk);It can also be used to exclude wet solid in a liquid,for example,rejection of wet clothes washing machine;special overdrive tube separator for separating gas can also be a mixture of different densities;using different density or size of the settling velocity of the solid particles in a liquid different characteristics,some settling centrifuge also on the density or particle size of solid particles by classification.
Centrifuge industry exist technical barriers
The centrifuge(High speed centrifuge) as one of the important pharmaceutical products and equipment,the market demand continues to increase.At the same time,the industry is also rising market requirements.However,the domestic market less competitive centrifuge is the most immediate problem facing,how to overcome technical barriers to the industry's top priority.
The advanced technology of the centrifuge step on the road of internationalization
Domestic centrifuges and imported centrifuges doesn't have great difference,China already has a centrifuge core technology.Same grade centrifuges price difference between them is not large,the main distinction in performance and configuration.The main difference is in terms of performance,the centrifuge with frozen much more expensive than the average,there are some centrifuges heating function,the higher the number of centrifuges price control program.The difference is larger configuration,the attachment will sometimes tend to price higher than the price of the host.When you purchase this product,you should be noted that in addition to the host,select the rotor (number and types),plus the necessary centrifuge tubes,tube sets,special centrifuge bottles or bags,all of which add up to is a complete benchtop centrifuge Price.
Want to catch up on foreign-made products centrifuges footsteps,we must develop advanced technologies,make a fuss in terms of performance and configuration devices,continued to narrow the gap between the two,gradually embarked on the road of internationalization.
The article comes from:http://www.medicalequipment-msl.com/htm/medical-device-book/Centrifuges-have-wide-applications.html

Thursday, June 12, 2014

Centrifugeuses sont largement utilisés dans le domaine médical,fabrication nationale met en œuvre la transformation.

Au cours des dernières années, l'industrie pharmaceutique nationale met en œuvre la transformation,en vertu du principe du maintien des caractéristiques de séparation de la centrifugeuse de paillasse,doivent répondre aux "Bonnes Pratiques de Fabrication" pour les besoins en équipement,surfaces de l'équipement en contact direct avec les médicaments devraient être lisse, plat, pas d'impasses, facile à nettoyer et à désinfecter, résistance à la corrosion, sans changements chimiques se produisent avec des médicaments ou des médicaments absorbés. 
En fait, la Centrifugeuse à grande vitesse est largement utilisé dans le domaine médical,séparation du sang, la recherche de virus, la recherche de DNA, purification des médicaments,etc si largement utilisé pour la centrifugeuse. Centrifugeuse pharmaceutique a une bonne capacité d'adaptation, le degré élevé d'automatisation, bien stable, forte technologie, la bonne résistance à la corrosion, bon environnement d'exploitation, appareils complets et fiables protection de la sécurité, beau en apparence et d'autres caractéristiques.La centrifugeuse qui utilisés dans le processus de raffinage et d'autres médicaments purification est généralement faible vitesse centrifugeuse,vitesse à 4000 tours par minute ou moins, de grande capacité,pour répondre aux GMP pharmaceutiques spécifications et exigences de production,en utilisant plat matériau en acier inoxydable. 
hématocrite centrifugeuse 
Du point de vue fonctionnel, la centrifugeuse réfrigérée pharmaceutique présente l'avantage de les aspects suivants: 1.Forte capacité d'adaptation de matériel,choix du support de filtre approprié,peuvent être séparés particules fines millimètres,Peut aussi être utilisé dans la déshydration des articles,peut être nettoyé l'article par le tube de lavage. 2. Manuel de type haut de décharge structure simple, facile à installer, à faible coût, facile à utiliser, maintenir la forme des grains de produit, 3. Peut réduire les vibrations causées par la charge inégale,la machine fonctionne en douceur.4. .La structure qui fonctionne à haute vitesse ,concentrée dans une carapace hermétique,l'étanchéité peut être obtenue,éviter la contamination des matériaux . 
Tous les coins, les soudures d'angle sont broyés dans le processus de production a eu une transition lisse et arrondie, pour éliminer les irrégularités, coin de santé, d'épanchement, de matériaux de produits tels que l'espace mort.Les experts conseillent: lorsque les clients choisissent centrifugeuse fondée l'anti-corrosion, les exigences de propreté des matériaux pour choix approprié matériaux. 
L'article vient de:http://www.medicalequipment-msl.com/fr/htm/livre-de-dispositif-médical/Centrifugeuses-sont-largement-utilisés-dans-le-domaine-médical.html

Centrifugeuses sont largement utilisés dans le domaine médical,fabrication nationale met en œuvre la transformation.

Au cours des dernières années, l'industrie pharmaceutique nationale met en œuvre la transformation,en vertu du principe du maintien des caractéristiques de séparation de la centrifugeuse de paillasse,doivent répondre aux "Bonnes Pratiques de Fabrication" pour les besoins en équipement,surfaces de l'équipement en contact direct avec les médicaments devraient être lisse, plat, pas d'impasses, facile à nettoyer et à désinfecter, résistance à la corrosion, sans changements chimiques se produisent avec des médicaments ou des médicaments absorbés. 
En fait, la Centrifugeuse à grande vitesse est largement utilisé dans le domaine médical,séparation du sang, la recherche de virus, la recherche de DNA, purification des médicaments,etc si largement utilisé pour la centrifugeuse. Centrifugeuse pharmaceutique a une bonne capacité d'adaptation, le degré élevé d'automatisation, bien stable, forte technologie, la bonne résistance à la corrosion, bon environnement d'exploitation, appareils complets et fiables protection de la sécurité, beau en apparence et d'autres caractéristiques.La centrifugeuse qui utilisés dans le processus de raffinage et d'autres médicaments purification est généralement faible vitesse centrifugeuse,vitesse à 4000 tours par minute ou moins, de grande capacité,pour répondre aux GMP pharmaceutiques spécifications et exigences de production,en utilisant plat matériau en acier inoxydable. 
hématocrite centrifugeuse 
Du point de vue fonctionnel, la centrifugeuse réfrigérée pharmaceutique présente l'avantage de les aspects suivants: 1.Forte capacité d'adaptation de matériel,choix du support de filtre approprié,peuvent être séparés particules fines millimètres,Peut aussi être utilisé dans la déshydration des articles,peut être nettoyé l'article par le tube de lavage. 2. Manuel de type haut de décharge structure simple, facile à installer, à faible coût, facile à utiliser, maintenir la forme des grains de produit, 3. Peut réduire les vibrations causées par la charge inégale,la machine fonctionne en douceur.4. .La structure qui fonctionne à haute vitesse ,concentrée dans une carapace hermétique,l'étanchéité peut être obtenue,éviter la contamination des matériaux . 
Tous les coins, les soudures d'angle sont broyés dans le processus de production a eu une transition lisse et arrondie, pour éliminer les irrégularités, coin de santé, d'épanchement, de matériaux de produits tels que l'espace mort.Les experts conseillent: lorsque les clients choisissent centrifugeuse fondée l'anti-corrosion, les exigences de propreté des matériaux pour choix approprié matériaux. 
L'article vient de:http://www.medicalequipment-msl.com/fr/htm/livre-de-dispositif-médical/Centrifugeuses-sont-largement-utilisés-dans-le-domaine-médical.html

Tuesday, June 10, 2014

Gants médicaux antiallergique en bourse aux États-Unis.


La US FDA a approuvé un nouveau gants en latex médical en vente dans le 23.La FDA a indiqué que ce gant est prévu pour résoudre les gants en latex traditionnelles facilement provoquer des allergies aux médecins. conduire des gants sont fabriquent par la société Yulex de l'Arizona Etats-Unis.le latex qui pour fabriquer lès produits est sur la base de guayule arbuste en désert sud-ouest américain.
Gants en latex médical traditionnels, extraits de brésilien latex hévéa, qui contient une protéine de latex peuvent déclencher des réactions allergiques, des allergies après l'utilisation de ce gant, légère réaction comprennent des rougeurs de la peau, des démangeaisons de cheveux et une éruption cutanée, peut conduire à de graves difficultés respiratoires et d'autres symptômes respiratoires Anesthésie Equipements et accessoires.


MSL lead glove and lead suit


Selon les statistiques, le système américain de soins de santé dans environ 3-22% des gens sont allergiques aux gants en latex traditionnelles. Des études montrent que, même très allergique aux gants en latex traditionnelles gens portent des gants gants de plomb à vendre en latex de guayule a la première fois , il n'apparaîtra pas de réactions allergiques.


The article comes from:http://www.medicalequipment-msl.com/fr/htm/livre-de-dispositif-m%C3%A9dical/msl-lead-gloves-for-sale.html

Gants médicaux antiallergique en bourse aux États-Unis.


La US FDA a approuvé un nouveau gants en latex médical en vente dans le 23.La FDA a indiqué que ce gant est prévu pour résoudre les gants en latex traditionnelles facilement provoquer des allergies aux médecins. conduire des gants sont fabriquent par la société Yulex de l'Arizona Etats-Unis.le latex qui pour fabriquer lès produits est sur la base de guayule arbuste en désert sud-ouest américain.
Gants en latex médical traditionnels, extraits de brésilien latex hévéa, qui contient une protéine de latex peuvent déclencher des réactions allergiques, des allergies après l'utilisation de ce gant, légère réaction comprennent des rougeurs de la peau, des démangeaisons de cheveux et une éruption cutanée, peut conduire à de graves difficultés respiratoires et d'autres symptômes respiratoires Anesthésie Equipements et accessoires.


MSL lead glove and lead suit


Selon les statistiques, le système américain de soins de santé dans environ 3-22% des gens sont allergiques aux gants en latex traditionnelles. Des études montrent que, même très allergique aux gants en latex traditionnelles gens portent des gants gants de plomb à vendre en latex de guayule a la première fois , il n'apparaîtra pas de réactions allergiques.


The article comes from:http://www.medicalequipment-msl.com/fr/htm/livre-de-dispositif-m%C3%A9dical/msl-lead-gloves-for-sale.html

Monday, June 9, 2014

Medical electrical equipment like ventilators must comply with EMC(electromagnetic compatibility) STANDARDS starting next year.

Medical electrical equipment like ventilators security upgrades must comply with EMC STANDARDS starting next year,which involves more than 10,000 products.


The reporter learned from The national food and drug supervision and administration and the party's style to build a clean government work conference that beginning from Jan.1st,2014,medical electrical equipment such as cardiac pacemakers,Ventilator equipment should meet EMC Standard,in purpose to ensure patients'safety in use.


Along with the wide application of electrons and Information Technology in medical electrical equipment,and rapid development of new communication technology(Personal Communication System,cellular ect.) in various fields of social life,the medical electrical equipment not only launch electromagnetic energy itself but also be disturbed by electromagnetic energy from other communication devices around,thus causing damage to patients.Therefore,developed countries enforce compliance of the electromagnetic compatibility test standard in forms of regulations one after another.For example,the EU have enforced the relevant medical electrical equipment electromagnetic compatibility test standard since 1998.


Ventilator equipment - MSLVM01


To ensure patients'safety use better,the NFDA and the national medical appliance standards technical committee drafted and released YY0505-2012 Standards for medical devices industry "Part 1~2 of Medical electrical equipment: General requirements for safety and EMC requirements and testing standards",which will be put into implementation from January 1,2014 on.


Director of Medical Devices Supervision Department (which is affiliated with NFDA) Wang Lanming said this standard will involve about 11,000 medical equipments electrical products produced by three or four thousands of medical device manufacturing enterprise domestic and overseas.The implementation of the standard can help to develop the safety and validity of medical electrical equipments and prevent products which don’t conform to the EMC standards into the Chinese market.At the same time,it helps us be in line with international standards,make import and export trade convenient,thus promoting the development of medical device industry in our country.


To guarantee the smooth implementation of the standard,the National Bureau has been clear about the specific requirements and time schedules.From Jan.1st,2014 on,they must submit the relevant test report issued by medical device testing institutions when first registering class Ⅲ medical electrical equipment.Currently,medical equipment quality supervision and inspection centers in Beijing,Shanghai,Guangzhou,Tianjin,Hangzhou and Wuhan,along with medical device testing institutions such as medical device testing centers in Jiangsu and Shenzhen have acquired qualification to contract the standard,which provides strong technical support to carry out the EMC test according to the relevant requirements.


The reporter also learnt from the conference that the National Bureau is going to strengthen the construction of medical instrument standard and testing system,establish and revise 105 standards for cheap medical instrument and strengthen the supervision and review of medical instrument testing institutions.


The article comes from:http://www.medicalequipment-msl.com/htm/medical-device-book/multi-functional-Ventilator.html

Medical electrical equipment like ventilators must comply with EMC(electromagnetic compatibility) STANDARDS starting next year.

Medical electrical equipment like ventilators security upgrades must comply with EMC STANDARDS starting next year,which involves more than 10,000 products.


The reporter learned from The national food and drug supervision and administration and the party's style to build a clean government work conference that beginning from Jan.1st,2014,medical electrical equipment such as cardiac pacemakers,Ventilator equipment should meet EMC Standard,in purpose to ensure patients'safety in use.


Along with the wide application of electrons and Information Technology in medical electrical equipment,and rapid development of new communication technology(Personal Communication System,cellular ect.) in various fields of social life,the medical electrical equipment not only launch electromagnetic energy itself but also be disturbed by electromagnetic energy from other communication devices around,thus causing damage to patients.Therefore,developed countries enforce compliance of the electromagnetic compatibility test standard in forms of regulations one after another.For example,the EU have enforced the relevant medical electrical equipment electromagnetic compatibility test standard since 1998.


Ventilator equipment - MSLVM01


To ensure patients'safety use better,the NFDA and the national medical appliance standards technical committee drafted and released YY0505-2012 Standards for medical devices industry "Part 1~2 of Medical electrical equipment: General requirements for safety and EMC requirements and testing standards",which will be put into implementation from January 1,2014 on.


Director of Medical Devices Supervision Department (which is affiliated with NFDA) Wang Lanming said this standard will involve about 11,000 medical equipments electrical products produced by three or four thousands of medical device manufacturing enterprise domestic and overseas.The implementation of the standard can help to develop the safety and validity of medical electrical equipments and prevent products which don’t conform to the EMC standards into the Chinese market.At the same time,it helps us be in line with international standards,make import and export trade convenient,thus promoting the development of medical device industry in our country.


To guarantee the smooth implementation of the standard,the National Bureau has been clear about the specific requirements and time schedules.From Jan.1st,2014 on,they must submit the relevant test report issued by medical device testing institutions when first registering class Ⅲ medical electrical equipment.Currently,medical equipment quality supervision and inspection centers in Beijing,Shanghai,Guangzhou,Tianjin,Hangzhou and Wuhan,along with medical device testing institutions such as medical device testing centers in Jiangsu and Shenzhen have acquired qualification to contract the standard,which provides strong technical support to carry out the EMC test according to the relevant requirements.


The reporter also learnt from the conference that the National Bureau is going to strengthen the construction of medical instrument standard and testing system,establish and revise 105 standards for cheap medical instrument and strengthen the supervision and review of medical instrument testing institutions.


The article comes from:http://www.medicalequipment-msl.com/htm/medical-device-book/multi-functional-Ventilator.html

Friday, June 6, 2014

Titanium jewelry products are not able to anti-radiation and adjust the "three high"


There is a metal jewelry,it can prevent radiation lead suits for radiation,can regulate the "three high",but also can relieve fatigue,is a "small but perfectly formed." Currently,some of the hit TV show shopping products,online,or even some of the mall in front of the counter,the marketing staff will recommend one with such a "magic" of titanium jewelry products,or collar or bracelet.For a time,the magic of titanium jewelry is widespread concern that some consumers.
However,for the titanium jewelry,medical experts believe that the titanium is not magic in fact,the "magic" purely Bluff,consumers should keep their eyes open to prevent fooled. 

Light metal can not anti-radiation


In a television shopping program,a Korean brand titanium bracelet played such a slogan;modern high-tech products generally make people's life become more convenient because while passively suffer because of the convenience brought about many side effects --- high-strength radiation.Titanium magnetic jewelry can be a lot of fatigue eliminate electromagnetic radiation,balance the body negative potential,to achieve the health effects of radiation. In this regard,the national chairman of neurological and psychiatric disorders targeted therapy,said Professor Li Anmin Committee,titanium metal is a very stable,high strength,light weight,corrosion resistant,non- magnetic and other physical characteristics.Titanium reserves on the planet and a lot,but because of the high cost of refining,which is currently only applied in aerospace,electronics,precision instruments manufacturing.In the medical field because of corrosion resistant and non-toxic body secretions,more body for medical devices and implants,such as internal splints,bolts and repair skull defects and so on. "Due to the appearance of a matte effect of titanium,titanium nitride close to gold in color,often used to make all kinds of jewelry,such as necklace,bracelets,etc.,they only have to watch the results,there will never be any medical function." Lee Min said,radiation includes electromagnetic radiation and radionuclide radiation,is a kind of high-energy ions penetrating,wavy,sporadic radiation.The real part of the radiation ions can withstand only a small number of heavy metals such as lead,radiologists commonly used lead aprons and lead glass to prevent and reduce radiation.Titanium is a light metal,combined with high thermal conductivity,the material itself is not the prevention of radiation,not to mention a small collar,bracelets and the like jewelry,there can be no radiation effect.
lead glass 

Without evidence prove that the titanium can adjust the "three highs"


In some malls,titanium jewelry sales people often say that the titanium can adjust "three highs".The so-called "three highs",is that people often speak of high blood pressure,high cholesterol,high blood sugar.Cardiovascular experts,however,the first affiliated hospital,director emphatically denied on this view."High blood pressure,high cholesterol,high blood glucose is the abnormal results of people's complex metabolic process,a variety of diseases and the launch of the factors,need through exercise,diet,drugs,such as a comprehensive adjustment,some need lifelong medication." director introduction,so far,haven't seen titanium can adjust any evidence of the "three highs"."If you are sick you must go to the hospital for regular treatment,the small collar can't treat you,it only can delay your treatment." 

Relieving fatigue just a fraud


It is known that,the society competition is become more and more fierce,the pace of life become faster and faster.people generally feel that the work pressure,fatigue enhancement.Titanium jewelry products is the " number" the pulse of the times prospective,played the slogan " relieving fatigue effect ".Certain brand marketing titanium collar staff,said,wearing a titanium necklace,increase the heat will relax the muscles and stimulate blood flow and help people to better eliminate blood substrates and fatigue factor generated by pain,fatigue and ultimately achieve health benefits.
Actually,fatigue is a sub-health phenomena,such as feeling boring,do not want to move;while others showed partial fatigue,such as pain in the neck,shoulder and back stiff and so on.Chubing reasons beyond rational cause fatigue factor,and more and overworked,work and mental stress and other factors,but also on some sleep or work due caused by poor posture,all these can cause neck pain.
"Many patients through surgery using the titanium fixation,titanium skull to relieve these patients,even though they have not yet experienced the effects of relieve fatigue.you wear a small collar in your physical appearance,bracelet,how can we play the same effect?" LiAnMin think,relieve fatigue first to develop good lifestyle,relax,to relieve the pressure,proper rest,proper exercise;If there are lesions,such as cervical spondylosis and other necessary treatment will be carried out.
We MEDSINGLONG GLOBAL GROUP CO.,LIMITED are able to offer a range of medical products,such as Ultrasound machine,x ray protection,Dental equipment,Autoclaves,ECG,Blood analyzer,Biochemical analyzer,Vet equipment,Radiation protection equipment and so on.Whether the hospital or clinic,or for personal use,you can find your own favorite products.Our mission is;No the best,only better!We are ready to serve you.
The article comes from:http://www.medicalequipment-msl.com/htm/medical-device-book/Titanium-jewelry-products-are-not-able-to-anti-radiation.html

Titanium jewelry products are not able to anti-radiation and adjust the "three high"


There is a metal jewelry,it can prevent radiation lead suits for radiation,can regulate the "three high",but also can relieve fatigue,is a "small but perfectly formed." Currently,some of the hit TV show shopping products,online,or even some of the mall in front of the counter,the marketing staff will recommend one with such a "magic" of titanium jewelry products,or collar or bracelet.For a time,the magic of titanium jewelry is widespread concern that some consumers.
However,for the titanium jewelry,medical experts believe that the titanium is not magic in fact,the "magic" purely Bluff,consumers should keep their eyes open to prevent fooled. 

Light metal can not anti-radiation


In a television shopping program,a Korean brand titanium bracelet played such a slogan;modern high-tech products generally make people's life become more convenient because while passively suffer because of the convenience brought about many side effects --- high-strength radiation.Titanium magnetic jewelry can be a lot of fatigue eliminate electromagnetic radiation,balance the body negative potential,to achieve the health effects of radiation. In this regard,the national chairman of neurological and psychiatric disorders targeted therapy,said Professor Li Anmin Committee,titanium metal is a very stable,high strength,light weight,corrosion resistant,non- magnetic and other physical characteristics.Titanium reserves on the planet and a lot,but because of the high cost of refining,which is currently only applied in aerospace,electronics,precision instruments manufacturing.In the medical field because of corrosion resistant and non-toxic body secretions,more body for medical devices and implants,such as internal splints,bolts and repair skull defects and so on. "Due to the appearance of a matte effect of titanium,titanium nitride close to gold in color,often used to make all kinds of jewelry,such as necklace,bracelets,etc.,they only have to watch the results,there will never be any medical function." Lee Min said,radiation includes electromagnetic radiation and radionuclide radiation,is a kind of high-energy ions penetrating,wavy,sporadic radiation.The real part of the radiation ions can withstand only a small number of heavy metals such as lead,radiologists commonly used lead aprons and lead glass to prevent and reduce radiation.Titanium is a light metal,combined with high thermal conductivity,the material itself is not the prevention of radiation,not to mention a small collar,bracelets and the like jewelry,there can be no radiation effect.
lead glass 

Without evidence prove that the titanium can adjust the "three highs"


In some malls,titanium jewelry sales people often say that the titanium can adjust "three highs".The so-called "three highs",is that people often speak of high blood pressure,high cholesterol,high blood sugar.Cardiovascular experts,however,the first affiliated hospital,director emphatically denied on this view."High blood pressure,high cholesterol,high blood glucose is the abnormal results of people's complex metabolic process,a variety of diseases and the launch of the factors,need through exercise,diet,drugs,such as a comprehensive adjustment,some need lifelong medication." director introduction,so far,haven't seen titanium can adjust any evidence of the "three highs"."If you are sick you must go to the hospital for regular treatment,the small collar can't treat you,it only can delay your treatment." 

Relieving fatigue just a fraud


It is known that,the society competition is become more and more fierce,the pace of life become faster and faster.people generally feel that the work pressure,fatigue enhancement.Titanium jewelry products is the " number" the pulse of the times prospective,played the slogan " relieving fatigue effect ".Certain brand marketing titanium collar staff,said,wearing a titanium necklace,increase the heat will relax the muscles and stimulate blood flow and help people to better eliminate blood substrates and fatigue factor generated by pain,fatigue and ultimately achieve health benefits.
Actually,fatigue is a sub-health phenomena,such as feeling boring,do not want to move;while others showed partial fatigue,such as pain in the neck,shoulder and back stiff and so on.Chubing reasons beyond rational cause fatigue factor,and more and overworked,work and mental stress and other factors,but also on some sleep or work due caused by poor posture,all these can cause neck pain.
"Many patients through surgery using the titanium fixation,titanium skull to relieve these patients,even though they have not yet experienced the effects of relieve fatigue.you wear a small collar in your physical appearance,bracelet,how can we play the same effect?" LiAnMin think,relieve fatigue first to develop good lifestyle,relax,to relieve the pressure,proper rest,proper exercise;If there are lesions,such as cervical spondylosis and other necessary treatment will be carried out.
We MEDSINGLONG GLOBAL GROUP CO.,LIMITED are able to offer a range of medical products,such as Ultrasound machine,x ray protection,Dental equipment,Autoclaves,ECG,Blood analyzer,Biochemical analyzer,Vet equipment,Radiation protection equipment and so on.Whether the hospital or clinic,or for personal use,you can find your own favorite products.Our mission is;No the best,only better!We are ready to serve you.
The article comes from:http://www.medicalequipment-msl.com/htm/medical-device-book/Titanium-jewelry-products-are-not-able-to-anti-radiation.html